すべての製品
-
ボブAstm E114-15のインチのタイプ1018の口径測定テスト ブロックの炭素鋼小型Iiw 2 -
ウィリアムAstm E114-15のインチのタイプ1018の口径測定テスト ブロックの炭素鋼小型Iiw 2
-
トムAstm E114-15のインチのタイプ1018の口径測定テスト ブロックの炭素鋼小型Iiw 2
-
レオAstm E114-15のインチのタイプ1018の口径測定テスト ブロックの炭素鋼小型Iiw 2
19mm Thickness Duplex Asme Ut Calibration Block
無料のサンプルとクーポンを私に連絡してください.
ワットスアップ:0086 18588475571
wechat: 0086 18588475571
スカイプ: sales10@aixton.com
24時間オンラインでサポートします
x商品の詳細
| 材料 | 炭素鋼,ステンレス鋼,デュプレックスステンレス鋼 2205,アルミニウム 7075 | 厚さ | 19mm/38mm/75mm/125mm |
|---|---|---|---|
| 穴の直径 | 2.5mm/3/5.5/65 | 口径測定の証明書 | 含まれている |
| 裁判について | 含まれている | OEM | そうだ |
| 製品名 | ASME超音波校正ブロック | ||
| ハイライト | duplex Asme Ut Calibration Block,duplex Ut Calibration Block,19mm Asme Ut Calibration Block |
||
製品の説明
ASME ultrasonic Calibration Blocks Ultrasonic calibration blocks ultrasonic calibration blocks uk
ASME calibration block (non pipe)
Standard: ASME BPVC-V-2015
The size and shape of ASME non-pipe weld test block are shown in the chart below, when inspected
For inspection on materials with surface diameter greater than 500mm, test blocks with the same curvature as the workpiece or standard test blocks with a diameter equal to or less than 500mm can be used
During the upper inspection, the curve test block, namely the tube seam test block, should be used.
1. The distance between each slot and either end of the test block or other slots is not less than T or 25mm, if larger.
2. The minimum length L of the test block shall be 200mm or 8T, if larger.
3. When the inner diameter is equal to or less than 100mm, the minimum radian is 270°. When the inner diameter is greater than 100mm, the minimum arc length is 200mm or 3T, and the larger is taken
4. The depth of each tank is 11% T≥h≥ 8% T, width ≤6mm, length ≥225mm
ASME calibration block (non pipe)
Standard: ASME BPVC-V-2015
The size and shape of ASME non-pipe weld test block are shown in the chart below, when inspected
For inspection on materials with surface diameter greater than 500mm, test blocks with the same curvature as the workpiece or standard test blocks with a diameter equal to or less than 500mm can be used
During the upper inspection, the curve test block, namely the tube seam test block, should be used.
1. The distance between each slot and either end of the test block or other slots is not less than T or 25mm, if larger.
2. The minimum length L of the test block shall be 200mm or 8T, if larger.
3. When the inner diameter is equal to or less than 100mm, the minimum radian is 270°. When the inner diameter is greater than 100mm, the minimum arc length is 200mm or 3T, and the larger is taken
4. The depth of each tank is 11% T≥h≥ 8% T, width ≤6mm, length ≥225mm
Material: carbon steel 1018, stainless steel 304/316, duplex stainless steel 2205,aluminum 7075
Hole diameter:2.5/3/5.5/6.5mm
Thickness: 19mm/38mm/75mm/125mm
Mark: OEM can be done
HUATEC Group offer all kinds ultrasonic calibration block
推薦されたプロダクト